not logged in | [Login]
Always use radiusd -X when debugging!
/*
* $Id: postgresql.sql,v 1.1.2.2 2006/04/11 13:14:41 pnixon Exp $
*
* Postgresql schema for FreeRADIUS
*
* All field lengths need checking as some are still suboptimal. -pnixon 2003-07-13
*
*/
/*
* Table structure for table 'radacct'
*
* Note: Column type BIGSERIAL does not exist prior to Postgres 7.2
* If you run an older version you need to change this to SERIAL
*/
CREATE TABLE radacct (
RadAcctId BIGSERIAL PRIMARY KEY,
AcctSessionId VARCHAR(32) NOT NULL,
AcctUniqueId VARCHAR(32) NOT NULL,
UserName VARCHAR(253),
Realm VARCHAR(64),
NASIPAddress INET NOT NULL,
NASPortId VARCHAR(15),
NASPortType VARCHAR(32),
AcctStartTime TIMESTAMP with time zone,
AcctStopTime TIMESTAMP with time zone,
AcctSessionTime BIGINT,
AcctAuthentic VARCHAR(32),
ConnectInfo_start VARCHAR(50),
ConnectInfo_stop VARCHAR(50),
AcctInputOctets BIGINT,
AcctOutputOctets BIGINT,
CalledStationId VARCHAR(50),
CallingStationId VARCHAR(50),
AcctTerminateCause VARCHAR(32),
ServiceType VARCHAR(32),
FramedProtocol VARCHAR(32),
FramedIPAddress INET,
AcctStartDelay BIGINT,
AcctStopDelay BIGINT
);
-- This index may be usefull..
-- CREATE UNIQUE INDEX radacct_whoson on radacct (AcctStartTime, nasipaddress);
-- For use by onoff-, update-, stop- and simul_* queries
CREATE INDEX radacct_active_user_idx ON radacct (userName) WHERE AcctStopTime IS NULL;
-- and for common statistic queries:
CREATE INDEX radacct_start_user_idx ON radacct (acctStartTime, UserName);
-- and, optionally
-- CREATE INDEX radacct_stop_user_idx ON radacct (acctStopTime, UserName);
/*
* There was WAAAY too many indexes previously. This combo index
* should take care of the most common searches.
* I have commented out all the old indexes, but left them in case
* someone wants them. I don't recomend anywone use them all at once
* as they will slow down your DB too much.
* - pnixon 2003-07-13
*/
/*
* create index radacct_UserName on radacct (UserName);
* create index radacct_AcctSessionId on radacct (AcctSessionId);
* create index radacct_AcctUniqueId on radacct (AcctUniqueId);
* create index radacct_FramedIPAddress on radacct (FramedIPAddress);
* create index radacct_NASIPAddress on radacct (NASIPAddress);
* create index radacct_AcctStartTime on radacct (AcctStartTime);
* create index radacct_AcctStopTime on radacct (AcctStopTime);
*/
/*
* Table structure for table 'radcheck'
*/
CREATE TABLE radcheck (
id SERIAL PRIMARY KEY,
UserName VARCHAR(64) NOT NULL DEFAULT '',
Attribute VARCHAR(64) NOT NULL DEFAULT '',
op VARCHAR(2) NOT NULL DEFAULT '==',
Value VARCHAR(253) NOT NULL DEFAULT ''
);
create index radcheck_UserName on radcheck (UserName,Attribute);
/*
* Use this index if you use case insensitive queries
*/
-- create index radcheck_UserName_lower on radcheck (lower(UserName),Attribute);
/*
* Table structure for table 'radgroupcheck'
*/
CREATE TABLE radgroupcheck (
id SERIAL PRIMARY KEY,
GroupName VARCHAR(64) NOT NULL DEFAULT '',
Attribute VARCHAR(64) NOT NULL DEFAULT '',
op VARCHAR(2) NOT NULL DEFAULT '==',
Value VARCHAR(253) NOT NULL DEFAULT ''
);
create index radgroupcheck_GroupName on radgroupcheck (GroupName,Attribute);
/*
* Table structure for table 'radgroupreply'
*/
CREATE TABLE radgroupreply (
id SERIAL PRIMARY KEY,
GroupName VARCHAR(64) NOT NULL DEFAULT '',
Attribute VARCHAR(64) NOT NULL DEFAULT '',
op VARCHAR(2) NOT NULL DEFAULT '=',
Value VARCHAR(253) NOT NULL DEFAULT ''
);
create index radgroupreply_GroupName on radgroupreply (GroupName,Attribute);
/*
* Table structure for table 'radreply'
*/
CREATE TABLE radreply (
id SERIAL PRIMARY KEY,
UserName VARCHAR(64) NOT NULL DEFAULT '',
Attribute VARCHAR(64) NOT NULL DEFAULT '',
op VARCHAR(2) NOT NULL DEFAULT '=',
Value VARCHAR(253) NOT NULL DEFAULT ''
);
create index radreply_UserName on radreply (UserName,Attribute);
/*
* Use this index if you use case insensitive queries
*/
-- create index radreply_UserName_lower on radreply (lower(UserName),Attribute);
/*
* Table structure for table 'usergroup'
*/
CREATE TABLE usergroup (
UserName VARCHAR(64) NOT NULL DEFAULT '',
GroupName VARCHAR(64) NOT NULL DEFAULT '',
priority INTEGER NOT NULL DEFAULT 0
);
create index usergroup_UserName on usergroup (UserName);
/*
* Use this index if you use case insensitive queries
*/
-- create index usergroup_UserName_lower on usergroup (lower(UserName));
/*
* Table structure for table 'realmgroup'
* Commented out because currently not used
*/
--CREATE TABLE realmgroup (
-- id SERIAL PRIMARY KEY,
-- RealmName VARCHAR(30) DEFAULT '' NOT NULL,
-- GroupName VARCHAR(30)
--);
--create index realmgroup_RealmName on realmgroup (RealmName);
/*
* Table structure for table 'realms'
* This is not yet used by FreeRADIUS
*/
--CREATE TABLE realms (
-- id SERIAL PRIMARY KEY,
-- realmname VARCHAR(64),
-- nas VARCHAR(128),
-- authport int4,
-- options VARCHAR(128) DEFAULT ''
--);
/*
* Table structure for table 'nas'
*/
CREATE TABLE nas (
id SERIAL PRIMARY KEY,
nasname VARCHAR(128) NOT NULL,
shortname VARCHAR(32) NOT NULL,
type VARCHAR(30) NOT NULL DEFAULT 'other',
ports int4,
secret VARCHAR(60) NOT NULL,
community VARCHAR(50),
description VARCHAR(200)
);
create index nas_nasname on nas (nasname);
--
-- Table structure for table 'radpostauth'
--
CREATE TABLE radpostauth (
id BIGSERIAL PRIMARY KEY,
username VARCHAR(253) NOT NULL,
pass VARCHAR(128),
reply VARCHAR(32),
authdate TIMESTAMP with time zone NOT NULL default 'now'
) ;
CREATE TABLE radippool (
id serial NOT NULL,
pool_name text NOT NULL,
ip_address inet,
nas_ip_address text NOT NULL,
nas_port integer NOT NULL,
calling_station_id text DEFAULT ''::text NOT NULL,
expiry_time timestamp(0) without time zone NOT NULL,
username text DEFAULT ''::text,
calledstationid character varying(64),
poolkey character varying(120)
);
--
-- Table structure for table 'dictionary'
-- This is not currently used by FreeRADIUS
--
-- CREATE TABLE dictionary (
-- id SERIAL PRIMARY KEY,
-- Type VARCHAR(30),
-- Attribute VARCHAR(64),
-- Value VARCHAR(64),
-- Format VARCHAR(20),
-- Vendor VARCHAR(32)
-- );
/*
* Note: (pnixon: 2003-12-10) The following function should not be required
* if you use the PG specific queries in raddb/postgresql.conf
*
* Common utility function for date calculations. This is used in our
* alternative account stop query to calculate the start of a session.
*
* This function is Copyright 2001 by Mark Steele (msteele@inet-interactif.com)
*
* Please note that this requires the plpgsql to be available in your
* radius database. If it is not available you can register it with
* postgres by running this command:
*
* createlang plpgsql <databasename>
*/
CREATE FUNCTION DATE_SUB(date,int4,text) RETURNS DATE AS '
DECLARE
var1 date;
var2 text;
BEGIN
var2 = $2 || '' '' || $3;
SELECT INTO var1
to_date($1 - var2::interval, ''YYYY-MM-DD'');
RETURN var1;
END;' LANGUAGE 'plpgsql';Last edited by Arran Cudbard-Bell, 2011-10-03 12:10:38
Sponsored by Network RADIUS 